Controversial as it may, if you're goal is to find the truth of the topics shown here, then I suggest you watch these and other videos. These crimes on the people should be unmasked, and these will continue until the American people wake up and put a stop to the evil perpetrators. The first step is to understand and have an open mind, unbelievable and ugly as it may, that this could really be happening...AMOR PATRIAE

Friday, January 19, 2018










US soldiers could soon travel like storm troopers

 

 

Army reveals armored trucks fitted with LASERS to blast mines out of the ground and explode stray bombs

  • Uses a laser to detonate bombs up to 300 meters away
  • Interrogator arm and manipulator claw can move 50 pounds of debris
  • Could be used instead of bomb disposal experts in body armour


The U.S. Army and Air Force are working together to develop laser weapons that can blast mines out of the ground.
The vehicles would be able to safely explode mines and other explosives from a distance.
Currently highly-trained bomb disposal specialists wore body armour, protective suits or used robots to render an area safe. 
Scroll down for video
The vehicles would be able to safely explode mines and other explosives from a distance.
+2
The vehicles would be able to safely explode mines and other explosives from a distance.
Called Recovery of Airbase Denied by Ordinance, or RADBO, it uses a laser to detonate bombs up to 300 meters away.
It also has the Army's integrated interrogator arm and manipulator claw, which can pull 50 pounds of debris up from cracks and underneath rubble.
Infrared cameras, driver vehicle enhanced capabilities and two alternators were installed to provide more than 1,100 amps of power. 
With lasers, operators can negate the threat of improvised explosive devices, makeshift bombs, mines, and other unexploded explosive ordnance from a safe distance.
The U.S. Army Aviation and Missile Research Development and Engineering Center, or AMRDEC, Prototype Integration Facility, or PIF, U.S. Air Force Air Combat Command and the Redstone Test Center developed the system.
'Building the prototype was right in the wheelhouse of what the PIF is set up to do,' said Steven Colvin, PIF project manager.
'We were able to assemble a strong team of mechanical, electrical and design engineers to solve the problems, fabricators and integrators to build the prototype and technical writers to document the installation, operation and maintenance of the system.'
Infrared cameras, driver vehicle enhanced capabilities and two alternators were installed to provide more than 1,100 amps of power.
+2
Infrared cameras, driver vehicle enhanced capabilities and two alternators were installed to provide more than 1,100 amps of power.
'We may see hundreds to thousands of small unexploded ordnance items on a runaway or airfield but the RADBO will allow us to reduce the time it takes to get an airfield operational,' said Marshall 'Doc' Dutton, Air Force explosive ordnance disposal modernization program manager of the Air Force Civil Engineer Center on Tyndall Air Force Base, Florida.
'Currently, if a runway gets hit it can take days to weeks to get cleared.
'With the RADBO, runways can be cleared and operational at a much quicker pace.' 
Another non-combat use of the RADBO is the ability for immediate range clearance allowing fighter pilots to use the range immediately after a live-ordnance drop training exercise.
Since ranges can be cleared immediately for repeated use, this capability has the potential to save lives on the battlefield.


















Military bosses developing Star Wars 'hoverbikes' for the battlefield

  • Hoverbike will become a Tactical Reconnaissance Vehicle
  • Could carry troops and equipment into battle
  • Being developed with UK firm Malloy Aeronautics 

Star Wars could soon be headed to the battlefield - thanks to a New Zealand inventor.
Malloy Aeronautics has revealed a deal with the  U.S. Department of Defense to develop its radical flying machine for the military.
They say the Hoverbike is being developed to operate as a new class of Tactical Reconnaissance Vehicle (TRV).
Scroll down for video
Malloy Aeronautics has revealed a deal with the U.S. Department of Defense to develop its radical flying machine for the US military.
+5
Malloy Aeronautics has revealed a deal with the U.S. Department of Defense to develop its radical flying machine for the US military.
A mockup of the full sized hoverbike, which is similar in size to a small car.
+5
A mockup of the full sized hoverbike, which is similar in size to a small car.
HOW IT WORKS
The 'hoverbike' is similar to a quadcopter, using four standard helicopter style rotors, overlapped with each other.
The full sized design uses a motorcycle engine and controls.
The firm made the announcement at the Paris Air Show.
Maryland Lt. Governor Boyd Rutherford joined with SURVICE Engineering Co., a Belcamp, Md.-based defense firm, and U.K.-based Malloy Aeronautics, an aeronautical engineering firm, to announce that the two companies have teamed up on the development of Hoverbike technology for the U.S. Department of Defense.
SURVICE and Malloy are working on the Hoverbike as part of an ongoing research and development contract with the U.S. Army Research Laboratory. 
As part of this strategic alliance, Malloy Aeronautics has also announced that they have established a U.S. office in Belcamp adjacent to Aberdeen Proving Ground to complete work on the Hoverbike.
'I am pleased to join with SURVICE Engineering and Malloy Aeronautics to announce their partnership on the Hoverbike, which represents a new frontier in aviation,' said Lt. Governor Rutherford.
'We are also very excited to welcome Malloy and look forward to working with them to grow their operations in Maryland.'
'Establishing an office in Maryland was a clear business decision,' said Chris Malloy, managing director of Malloy Aeronautics.
'The proximity to the Army Research Laboratory and U.S. defense decision makers, access to the world-class facilities through the laboratory's Open Campus initiative, and the co-location with our strategic business partner, SURVICE Engineering, were all factors in favor of Maryland as the best choice for Malloy Aeronautics.'


The world's first flying motorcycle! Hoverbike gets test flight


The hoverbike is here! The 1/3 scale version of the bike being piloted by a 3d printed robo-pilot
+5
The hoverbike is here! The 1/3 scale version of the bike being piloted by a 3d printed robo-pilot
The firm says it producing a 1/3 sized version of its design to help fund the full sized prototype.
'This drone was originally built as a proof of concept for our latest full-sized Hoverbike prototype,' said Chris Malloy, the drone's inventor.
'After testing the 1/3rd Hoverbike, we realized that it had lots of features that made it a fantastic drone, not only this - selling this scale Hoverbike to the public would allow us to raise funds to continue the development of the manned version.
'The objective of this campaign is to kick-start sales of our beautiful 1/3rd scale Hoverbike drone and accessories via your pledges, and to help create a long term income stream that we can use to continue development of the manned Hoverbike,' it says.
The full sized design uses a motorcycle engine and controls.
However, the smaller version uses electric motors, and can be controlled using a standard RC helicopter controller.
The hoverbike in action - complete with its 3D printed humanoid robot driver.
The hoverbike in action - complete with its 3D printed humanoid robot driver.
The drone is made up of four blade, which give it its stability.
+5
The drone is made up of four blade, which give it its stability.
The firm says its full sized version could be used to commute on.
The futuristic prototype has the potential to travel up to 92 miles or for about 45 minutes on one tank of fuel and is expected to come with a hefty price tag of more than £45,000.
So far the bike, which weighs 270kgs, has only been tested while tethered to the ground to prevent it flying too high. But plans to test it's capabilities without any restrictions are set to go-ahead soon.
The firm will also make a 3D printable pilot, who can have a Go Pro camera fitted in his 'head' to record flights
+5
The firm will also make a 3D printable pilot, who can have a Go Pro camera fitted in his 'head' to record flights
'We combined the simplicity of a motorbike and the freedom of a helicopter to create the world's first flying motorcycle,' it said.
'When compared with a helicopter, the Hoverbike is cheaper, more rugged and easier to use - and represents a whole new way to fly. 
'The Hoverbike flies like a quadcopter, and can be flown unmanned or manned, while being a safe - low level aerial workhorse with low on-going maintenance.'
The firm says it is almost ready to begin flight testing of the full sized version.
Big screen: Luke Skywalker(Mark Hamill) and Princess Leia (Carrie Fisher) battle a baddie on their speeder bike in Star Wars Return of the Jedi
Big screen: Luke Skywalker (Mark Hamill) and Princess Leia (Carrie Fisher) battle a Stormtrooper on their speeder bike in Star Wars Return of the Jedi
'We are in the final construction stages of the latest manned prototype of Hoverbike, and in a few months we will start flight testing.
'After the successful completion of test flights we will build a final engineering prototype for submission to aviation certification authorities.











































 

 

 

0-60 in 3.5 seconds and a top speed of 80mph: the former tank that performs like a sports car on any terrain



  • Ripsaw Extreme Vehicle 2 is fasted tracked vehicle ever developed
  • Makers spends six months transforming tank into personalized off-roader
  • The modified tank was recently used in Mad Max: Fury Road



  • Originally developed to help to avoid IEDs, has become a hit with car enthusiasts
  • New single seater version has a hugely updated 1500 horsepower engine and  improved suspension
It has been dubbed the first 'sports tank', boasting supercar performance on tank tracks.
Originally developed to help to military avoid IEDs, the Ripsaw 'sports tank' has become a hit with car enthusiasts.
Now, a new version has received a huge overhaul - and has been dubbed 'the most obnoxious vehicle ever built'. 
Scroll down for video 
The newest incarnation, the EV3-F1, is 'the most extreme and most terrain dominant Ripsaw ever developed,' the firm behind it says.
The newest incarnation, the EV3-F1, is 'the most extreme and most terrain dominant Ripsaw ever developed,' the firm behind it says.

THE RIPSAW'S SPECS 

Weight: 9,000 lbs (4,080kg)
Height: 5.8ft (1.8 metres)
Engine: 6.6 duramax 750 hp
Payload capacity: 2,000lbs (910kg) 
Ground clearance: 2ft (0.6 metres)
Speed: 95mph (153km/h) The Ripsaw, developed by twin brothers Mike and Geoff Howe, both 40, from Maine-based company Howe and Howe technologies, has been around for several years in various forms.
Originally designed and built for the military as a light weight, go fast super tank, it found a second life as a luxury vehicle for well heeled car fans.
'Since 2013, Howe and Howe Tech has spent thousands of man hours developing these beautiful yet rugged and refined consumer based Ripsaw chassis's for the high end luxury market and extreme off-road enthusiast,' the firm said.
'From 16 inches of suspension travel, to luxurious interiors and up to 1500 horsepower, The Ripsaw platform is in league of its own when it comes to capability, speed, sheer adrenaline and luxury.'
The firm refuses to say how much each vehicle costs, but says they are 'handcrafted, limited run, high end luxury tracked platforms developed for the public and extreme off road recreation.' 
Each one takes up to 6 months to fabricate and can cost over half a million dollars.
The newest incarnation, the EV3-F1, is 'the most extreme and most terrain dominant Ripsaw ever developed,' the firm says.
High-speed Ripsaw tank plows though snowy terrain
Advertisement 0:29
The new single seater version boasts a 'floating cabin' the keep the driver safe
The new single seater version boasts a 'floating cabin' the keep the driver safe
The 'sports tank' is showing pulling a wheelie down a road and taking to the air with ease in the new video
'Designed with up to 1500hp and an astonishing .2 hp/lbs power to weight ratio, with over 112 inches of track on the ground, the Ripsaw EV3-F1 stands as one of the world's most exhilarating single seat off-road vehicles ever conceived.'
The original Ripsaw, which has a 650bhp engine , is a dual-tracked vehicle originally developed as an anti-IED platform for the military but is now mostly hired out for recreational purposes.
The ripsaw specs: The new version has dozens of upgrades from the 'classic' Ripsaw
The ripsaw specs: The new version has dozens of upgrades from the 'classic' Ripsaw
Mike said: ‘We started developing the Ripsaw in the 1990s, as we had been developing off-road technology and wanted to take it to the next level.
‘We decided to build a high speed track vehicle, like a really fast track vehicle that's not slow like a regular tank - we knew that that had never been done before.’
The Ripsaw is shown racing a snowmobile in the stunning video
The Ripsaw is shown racing a snowmobile in the stunning video
The brothers developed their innovations to help police and the armed forces. 
One of their most successful creations is the Swat Bot, which doubles as a robotic shield and a battering ram.
Geoff said: ‘The Swat Bot developed out of our existing technology for the US military.
The 'basic' Ripsaw (shown) is capable of up to 95mph (153km/h) and is a dual-tracked vehicle originally developed as an anti-IED platform for the armed forces
The 'basic' Ripsaw (shown) is capable of up to 95mph (153km/h) and is a dual-tracked vehicle originally developed as an anti-IED latform for the armed forces
‘In some of our military contracting we have been tasked with finding a robot, a walk behind IED defeat robot.
‘The original robot walks in front of the soldiers and digs the land up in front of them, ensuring the soldier doesn't get blown up.
The Swat Bot (pictured) serves as a ¿robotic ballistic shield, door breacher and debris remover when the environment is deemed unsafe¿
The Swat Bot (pictured) serves as a ‘robotic ballistic shield, door breacher and debris remover when the environment is deemed unsafe’
When expanded, the shield (pictured during a training exercise) measures 8ft (2.5 metres) wide - large enough to offer ¿the operator and team adequate cover from gunfire and explosive scenarios¿ explained the designers
When expanded, the shield (pictured during a training exercise) measures 8ft (2.5 metres) wide - large enough to offer ‘the operator and team adequate cover from gunfire and explosive scenarios’ explained the designers
‘Our police officers put their lives on the line everyday and we wanted to give them that protection, so instead of carrying a shield and being laden down with weight, the swat bot does all that - it's a fully operational shield as well as a door buster.’
According to their website, the Swat Bot serves as a ‘robotic ballistic shield, door breacher and vehicle and debris remover when the environment is deemed unsafe.’
When expanded, the shield stretches to 8ft (2.5 metres) wide, enough to offer ‘the operator and team adequate cover from gunfire and explosive scenarios.’
And the vehicle, which is collapsible for ease of transport and weighs 2,290lbs (1,040kg), can be started up in just five seconds.


Read more: http://www.dailymail.co.uk/sciencetech/article-5280847/Ripsaw-reveals-special-edition-sports-tank.html#ixzz54eQv7700
Follow us: @MailOnline on Twitter | DailyMail on Facebook


It can go from 0-60 in 3.5 seconds, travel at 80 mph, and manoeuvre over any surface or terrain a tank can.
A US company is selling high-powered former military tanks as 'luxury vehicles' for anyone who has a spare few hundred thousands dollars.
Looking like a cross between the Batmobile and a moon buggy, the Ripsaw Extreme Vehicle 2 has been crafted into 'one of the world's most sought after high performance, luxury vehicles,' according to makers Howe & Howe Technologies.
Scroll down for video
Fast: The Ripsaw Extreme Vehicle 2 is the fastest tracked military vehicle created by Howe & Howe
+5
Fast: The Ripsaw Extreme Vehicle 2 is the fastest tracked military vehicle created by Howe & Howe
Originally designed for the US military for service as a high-speed tracked vehicle, it is the fastest tracked vehicle ever developed.
Since its military beginnings, the tank now sports 12-inches of suspension travel, a luxury interior, and a 600 horsepower diesel engine, while the gun and much of its body armor has been removed.
The vehicle has advanced suspension tracks, while its huge engine that sits at the back, giving it an acceleration that rivals most sports cars.
The custom-made machines are capable of trekking across all terrains including ice, snow and desert and have been developed in the name of fun.
'These vehicles take up to six months to fabricate and can cost well into the hundreds of thousands depending on desired luxury and performance packages,' a company spokesman said.


Incredible super tank turned sports car tears up terrain


Agile: The vehicles are described as the ultimate luxury vehicle for off-roading
+5
Agile: The vehicles are described as the ultimate luxury vehicle for off-roading
Flashy: Inside the cockpit, the colorful controls look like something out of the movies. Incidentally, the vehicle was recently used in Mad Max 2
+5
Flashy: Inside the cockpit, the colorful controls look like something out of the movies. Incidentally, the vehicle was recently used in Mad Max 2
High powered: The custom made tanks take about six months to alter into the ultimate all terrain vehicles
+5
High powered: The custom made tanks take about six months to alter into the ultimate all terrain vehicles
Movie fans may recognize the souped up tanks as the Peacemaker chase vehicle in Mad Max: Fury Road.
Filmmakers use a modified Ripsaw, with a car body on top, in the Hollywood blockbuster.
The limited edition EV2s have been developed for public and extreme off road recreation.
Desert: The Ripsaw EV2 was originally designed and built for the military as a high speed super tankDesert: The Ripsaw EV2 was originally designed and built for the military as a high speed super tank
Desert: The Ripsaw EV2 was originally designed and built for the military as a high speed super tank
All terrain: The military vehicle was designed for all surfaces and is described as the ultimate off-road luxury vehicle
+5
All terrain: The military vehicle was designed for all surfaces and is described as the ultimate off-road luxury vehicle. This can be used as the base for an anti UAV weapon
The sports car tank that can down a drone: My proposal, reveals anti-UAV weapon that can fire lasers from a moving vehicle
  • Designed for use on light tactical vehicles such as the Humvee
  • Initial trials with low power lasers have already taken place
  • The 30kW system is expected to be ready for field testing in 2016
Enemy drones have become a major threat on the battlefield, and the UU Navy hopes a roof mounted laser could be the answer.
Its Ground-Based Air Defense Directed Energy On-the-Move program, commonly referred to as GBAD, allowing controllers to simply drive the weapon to a target.
Once drones are spotted, it can them shoot them out of the sky with a high powered laser.

High powered: The custom made tanks take about six months to alter into the ultimate all terrain vehicles 

High powered: The custom made tanks take about six months to alter into the ultimate all terrain vehicles
The system will be able to spot and track drones, then shoot them out of the sky using a 30kw laser.
+2
The system will be able to spot and track drones, then shoot them out of the sky using a 30kw laser.
'We're confident we can bring together all of these pieces in a package that's small enough to be carried on light tactical vehicles and powerful enough to counter these threats,' said Brig. Gen. Kevin Killea, vice chief of naval research and commanding general, the Marine Corps Warfighting Laboratory.
The GBAD system is being designed for use on light tactical vehicles such as the Humvee and Joint Light Tactical Vehicle.
The navy hopes the system will provide an affordable alternative to traditional firepower to keep enemy unmanned aerial vehicles (UAVs) from tracking and targeting Marines on the ground.
'We can expect that our adversaries will increasingly use UAVs and our expeditionary forces must deal with that rising threat,' said Col. William Zamagni, acting head of ONR's Expeditionary Maneuver Warfare and Combating Terrorism Department.

Some of the system's components already have been used in tests to detect and track UAVs of all sizes. Later in the year, researchers will test the entire system against targets using a 10kW laser as a stepping stone to a 30kW laser.
Some of the system's components already have been used in tests to detect and track UAVs of all sizes. Later in the year, researchers will test the entire system against targets using a 10kW laser as a stepping stone to a 30kW laser.
'GBAD gives the Marine Corps a capability to counter the UAV threat efficiently, sustainably and organically with austere expeditionary forces.
'GBAD employed in a counter UAV role is just the beginning of its use and opens myriad other possibilities for future expeditionary forces.'
Some of the system's components already have been used in tests to detect and track UAVs of all sizes.
Later in the year, researchers will test the entire system against targets using a 10kW laser as a stepping stone to a 30kW laser.
The 30kW system is expected to be ready for field testing in 2016, when the program will begin more complex trials to ensure a seamless process from detection and tracking to firing, all from mobile tactical vehicles.
Spotter vehicles and a control car will allow the system to operate anywhere.
Malloy Aeronautics has revealed a deal with the U.S. Department of Defense to develop its radical flying machine for the US military. 
  • Hoverbike will become a Tactical Reconnaissance Vehicle
  • Could carry troops and equipment into battle
Spotter vehicles and a control car will allow the system to operate anywhere.











































No comments: